Emerald K3 K6 Racing Dash2 manual

The Emerald ECU outputs live data through CAN bus. It is compatible with LDperformance racing Dash2.

Hardware Connectivity

The CAN bus link is essentially two wires: CANH and CANL. They are usually found here on an a K3 / K6 ECU:

CAN High and CAN Low wires must be connected to the corresponding CANH and CANL wires on the Racing DASH2 preferably using a twisted pair cable.

Emerald Software configuration

Connect to the emerald ecu and go to “ECU Configuration” – “CAN Datalink”.

Choose “Emerald-Generic” Press “ECU” – “Update ECU configuration”

Software configuration on Racing DASH2

Connect the Racing Dash2 to a windows laptop using a USB to Serial adapter cable (not supplied).

Run the Configuration Software available from here.

Drag and drop parameters from the right “Data from ECU” to any position on the dash.

Not all parameters are available for all ECUs.

Press Save to keep settings.